# doc-cache created by Octave 11.1.0
# name: cache
# type: cell
# rows: 3
# columns: 8
# name: <cell-element>
# type: sq_string
# elements: 1
# length: 13
example_blink


# name: <cell-element>
# type: sq_string
# elements: 1
# length: 22
 blink the LED on D13



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 22
 blink the LED on D13




# name: <cell-element>
# type: sq_string
# elements: 1
# length: 18
example_i2c_eeprom


# name: <cell-element>
# type: sq_string
# elements: 1
# length: 234
 example using the arduino i2c
 to communicate to a 24XX256 EEPROM chip connected to an uno

 Connection  of arduino to EEPROM as follows:
 Arduino    24XX256 eeprom (pin)
 A4      -  5
 A5      -  6
 5V      -  8
 GND     -  1,2,3,4



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 80
 example using the arduino i2c
 to communicate to a 24XX256 EEPROM chip conne...



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 22
example_i2c_tempsensor


# name: <cell-element>
# type: sq_string
# elements: 1
# length: 393
 example using the arduino i2c to communicate to a Si7021 via a 
 sparkfun SparkFun Humidity and Temperature Sensor Breakout board
 https://www.sparkfun.com/products/13763

 Conection  of arduino to breakout board as follows:
 Arduino    breakoutboard (pin) (name depending on rev of board)
 A4      -  3 (DA or SDA)
 A5      -  4 (CL or SCL)
 3V3     -  2 (+ or 3V3)
 GND     -  1 (- or GND)



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 80
 example using the arduino i2c to communicate to a Si7021 via a 
 sparkfun Sp...



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 27
example_i2c_tempsensor_plot


# name: <cell-element>
# type: sq_string
# elements: 1
# length: 394
 example using the arduino i2c to communicate to a Si7021 via a 
 sparkfun SparkFun Humidity and Temperature Sensor Breakout board
 https://www.sparkfun.com/products/13763

 Connection  of arduino to breakout board as follows:
 Arduino    breakoutboard (pin) (name depending on rev of board)
 A4      -  3 (DA or SDA)
 A5      -  4 (CL or SCL)
 3V3     -  2 (+ or 3V3)
 GND     -  1 (- or GND)



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 80
 example using the arduino i2c to communicate to a Si7021 via a 
 sparkfun Sp...



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 18
example_lcd_plugin


# name: <cell-element>
# type: sq_string
# elements: 1
# length: 72
 test LCD plugin using the Arduini LinkSprite16x2 LCD LCD Keypad shield



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 72
 test LCD plugin using the Arduini LinkSprite16x2 LCD LCD Keypad shield




# name: <cell-element>
# type: sq_string
# elements: 1
# length: 20
example_shiftreg_595


# name: <cell-element>
# type: sq_string
# elements: 1
# length: 96
 example using a 74HC595 shift register
 breakout board https://www.sparkfun.com/products/10680



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 80
 example using a 74HC595 shift register
 breakout board https://www.sparkfun....



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 19
example_spi_mcp3002


# name: <cell-element>
# type: sq_string
# elements: 1
# length: 62
 test program for octave - arduino - mcp3002 10 bit ADC (spi)



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 62
 test program for octave - arduino - mcp3002 10 bit ADC (spi)




# name: <cell-element>
# type: sq_string
# elements: 1
# length: 19
example_sweep_servo


# name: <cell-element>
# type: sq_string
# elements: 1
# length: 69
 example control servo on D9
 scans servo between min - max position



# name: <cell-element>
# type: sq_string
# elements: 1
# length: 69
 example control servo on D9
 scans servo between min - max position






